Effect of CTBN rubber inclusions on the curing kinetic of DGEBA-DGEBF epoxy resin

The curing kinetics of an epoxy resin matrix, based on diglycil ether of bisphenol A and F (DGEBA-DGEBF), associated with an anhydride hardener, at different carboxyl-terminated copolymer of butadiene and acrylonitrile liquid rubber (CTBN) concentration (0-10 phr) are studied using a differential scanning calorimetry (DSC) and a stress-controlled rheometer in isothermal and dynamic conditions. The aim of this work is to correlate the presence of the rubber phase with the transition phenomena that occur during the curing process. The CTBN rubber induces a catalytic effect on the polymerization of the pure resin clearly observed by a significant enhancement of the curing rate. Calorimetric and rheological analysis also evidences that gelation and vitrification times take place not punctually but in a wide range of time. Rheological data show that the presence of rubbery phase induces a higher rate of gel formation during the early stages of the reactions, confirming the calorimetric results. Finally the results are compared with theoretical models evidencing a good fitting between experimental and predictive data.     

光聚合引发剂研究进展

对最近几年光敏聚合引发体系的研究进展进行了评述，并就一些新型光敏引发体系及引发机理进行了介绍。     

氨基聚酯树脂固化过程的FTIR跟踪

用FTIR内标法跟踪氨基聚酯树脂的固化过程,选取815cm~(-1)的三嗪环面外振动峰作内标峰,913cm~(-1)处的甲氧基变形振动峰和3500cm~(-1)左右的羟基伸缩振动峰为特征吸收峰。结果表明,随着固化的进行,涂膜的羟基、甲氧基和羧基递减,醚键和羰基递增,说明固化过程是以交联反应为主,伴有自缩合反应和酯化反应的复杂过程。     

Coating of Methyltriethoxysilane—Modified Colloidal Silica on Polymer Substrates for Abrasion Resistance

Organic-inorganic hybrid composites were prepared by the sol-gel method for the hard coating agent of transparent plastic, and their abrasion resistance, optical and surface characteristics were evaluated. Methyltriethoxy-silane (MTES) and colloidal silica were used as starting materials. The addition of MTES to colloidal silica enabled the formation of dense thin films with very smooth surface on the substrates. The thin films were strongly adhered to the substrates without primer treatment. The abrasion resistance increased with the increase in the ratio of MTES to the colloidal silica. Optimal amount of MTES for the hard coating agent was 100 wt% to the colloidal silica. The addition of curing catalyst, tetramethylammonium formate was found to be very effective to enhance the adhesion strength of coating agent to the substrates and reduced curing time.     

成像核弛豫速率和化学位移与其分子量大小和钆喷酸浓度的相关性

在测试磁共振成像(MRI)用造影剂钆喷酸葡胺(Magnevist)溶液的纵向弛豫速率和化学位移实验中, 观察到溶液中被观测核的弛豫速率加快和化学位移变化与其分子大小和造影剂浓度呈密切的相关性: 对于小分子成像核(水), 弛豫速率和化学位移都与造影剂浓度变化呈很好的线性关系; 而对于大分子成像核(PEG-2000和PEG-6000), 其化学位移和弛豫速率与造影剂浓度变化则呈非线性关系.     

CURE OF A MICROGEL-EPOXY RESIN TWO-PHASE POLYMER WITH ETHYLENE DIAMINE

The curing of a microgel-epoxy resin two phase polymer prepared by in situ copolymerization of unsaturated polyester with acrylic monomer was studied. The unsaturated unit reacted with N—H during the cure of the resin with ethylene diamine. The Michael type reaction was ten times more rapid than the addition of N—H to epoxide.This was accounted for the lower apparent activation energy of the curing of the two phase resin.     

C_(60)/C_(70)及其衍生物(C_(60)Cl_n/C_(70)Cl_n)在丁二烯阴离子聚合中的偶联作用

Fullerene(富勒烯)独特的结构和性质吸引了高分子界广泛的关注.迄今,已通过和自由基共聚[1]、活性自由基聚合[2]、阳离子聚合[3]、阴离子聚合[4～8]以及配位聚合[9～13]等诸多方法相结合制备出了种类繁多的富勒烯高分子衍生物.不仅如此,富勒烯家族的重要分支--富勒烯卤化物,其独特的分子结构和具有的新性质也甚引起人们的重视[14,15].     

助熔剂对煤焦高温气化反应性的影响

研究了平顶山十二矿高灰熔点煤灰分别添加助熔剂(氧化钙和三氧化二铁)后灰熔点的变化规律，并考察了1 300 ℃～1 550 ℃范围内适宜助熔剂添加量下煤焦的气化反应性变化规律。实验表明：以灰的流动温度（t3）为选择依据，十二矿煤助熔剂氧化钙、三氧化二铁的适宜添加量相应为：3%～7%和5%～10%；助熔剂添加量对煤焦气化反应性的影响与气化温度密切相关。较低气化温度时，煤焦的气化反应性随添加量的增加而提高，但随温度的提高，助熔剂添加量对煤焦反应性的影响逐渐减弱，温度升至1 550 ℃时，助熔剂的影响几乎消失。助熔剂在高温下的熔融、团聚导致其在煤焦中分散性的改变，从而使助熔剂在较低温度下具有的催化作用很快消失，这可能是高气化温度下煤焦气化反应性不受助熔剂影响的最重要原因之一。     

Iron hydroxide nanoparticles coated with poly(ethylene glycol)-poly(aspartic acid) block copolymer as novel magnetic resonance contrast agents for in vivo cancer imaging

PEG-coated β-FeOOH nanoparticles were prepared through electrostatic complex formation of iron oxide nanoparticles with poly(ethylene glycol)-poly(aspartic acid) block copolymer [PEG-P(Asp)] in distilled water. By dynamic light scattering (DLS) measurement, the nanopaticle size was determined to be 70 nm with narrow distribution. The FT-IR and zeta potential experimental results proved that PEG-PAsp molecules bound to the surface of the iron oxide nanoparticles via the coordination between the carboxylic acid residues in the PAsp segment of the block copolymer and the surface Fe of the β-FeOOH nanoparticles. The PEG-coated nanoparticles revealed excellent solubility and stability in aqueous solution as well as in physiological saline. In vivo MRI experiments on tumor-bearing mice demonstrated that the PEG-coated nanoparticles prepared by the current approach achieved an appreciable accumulation into solid tumor, suggesting their potential utility as tumor-selective MRI contrast agents.     

钛酸酯偶联剂的合成及应用

本文叙述了单烷氧型、磷酸酯型和螯合型钛酸酯偶联剂的合成,以及它们在高分子材料中的作用和应用范围.